Module CAN bus

APLUS Système Automation présente les modules CAN bus de son partenaire SINTRONES.

Pour plus d’informations sur ces produits, n’hésitez pas à contacter notre équipe commerciale à votre disposition.



document PDF Sintrones - Module CAN bus

Voir la gamme de produits : MODULE CAN BUS SINTRONES



– Can handle up to 1Mbit/s CAN bitrate
– Industrial Temp range -40C to +85C
– USB 2.0 Full Speed, uses FTDI FT245RL
– Philips SJA1000 CAN Controller running at 16Mhz
– Philips 82C251 CAN Tranceiver (ISO 11898-24V)
– Compliant to CAN 2.0A (11bit ID) & CAN 2.0B (29bit ID)
– Supports RTR frames
– 32 CAN frames deep FIFO buffer for incomming frames
– Time Stamp (optional) in mS for incomming frames
– CAN connection according to CiA DS102-1 standard
– Power supplied via USB
– Free Interface DLL (32 & 64bit) or low level Ascii Commands – API
– Free Windows USB driver available (32 & 64bit)
– Free Linux USB driver available
– Free MacOS USB driver available
– Green LED for CAN activity
– Red LED for CAN error activity
– Firmware updatable via USB
– CE Approved
– RoHS & WEEE Compliant



– CANbus 2.0B backward compatible with 2.0A
– Complies with EN61000-4-5 2.5kV Surge protection
– Complies with IEC 60950-1:2005 + A1: 2009 + A2:2013 2.5kV HiPOT protection
– Complies with EN61000-4-2 (ESD) Air-15kV, Contact-8kV
– Supports -40 to +85°C
– Supports 3rd mounting hole and USB Pin header for out-of-minicard installation
– Additional driver to support Linux SocketCAN
– LED indicator Power/Error/Active/Link
– Support baud rate 50/125/250/500/1000K
– Termination resistor enabled/disabled by jumper
– 30μ ” golden finger, 3 years warranty
– Industrial design, manufactured in Innodisk Taiwan